- Harman Advance - 11 years strong!
- Reviewed and rated by
ccdcc
on February 20, 2012
-
This is my elventh year with my Harman Advance as my primary heat source. Still using the original igniter – home made outside air (dealer didn’t even know aout it at the time- told...
- Harman Advance cleaning
- Reviewed and rated by
Stoveguy
on January 27, 2012
-
I sell these stoves. I cannot tell you how many times we receive calls from people saying that their stove is smokey and making creosote. When asked if they have cleaned the burn pot. Their...
- Harman Advance - works great but LOUD auger
- Reviewed and rated by
bcb1
on January 17, 2012
-
We purchased our new Harman Advance in Dec 2011. It works great, heats great.
My issue is the very loud auger motor, it makes an irritating grinding, low-hum noise every time it feeds...
- Harman Advance
- Reviewed and rated by
Robert K.
on January 14, 2012
-
I have spent over 700 dollars on igniters alone in the past 4 years. Dealer says out of warranty and thats the nature of the beast. Between the wasted pellets and all the noises that emmite from...
- Harman Advance
- Reviewed and rated by
John and Sue
on December 11, 2011
-
We purchased this stove in 2005 and have had more bad than good. We have replaced the motor and chain more times than we can count. We have come to the conclusion that there is cleary a design...
- Harman Advance
- Reviewed and rated by
Phoenixx01
on November 17, 2011
-
I have a Harmond fireplace insert. If you can take the fan noise it will give you enough heat for your house. The problem is the fan is so loud you need to keep it on the lowest speed just to...
- Harman Advance
- Reviewed and rated by
northcoastOhio
on November 16, 2011
-
We have had our H Advance since 2005 and have had no problems with it. Paid 1400 NEW and installed it myself, not hard to do. We burn about 3 to 4 ton/winter at about...
- Harman Advance
- Reviewed and rated by
Mike in NB
on October 20, 2011
-
I’ve had this stove for 4 years and every year another problem. Smoke in hopper which eventually gummed up the auger mechanism with creasote. Stove had to be taken out and burned with a...
- Harman Advance Dirty window
- Reviewed and rated by
vdeforest
on September 21, 2011
-
Overall I really like this stove. The left hand window gets covered with ash about 6 hours after cleaning. It’s annoying and the dealer doesn’t have a way to correct the problem.
- Harman Advance
- Reviewed and rated by
mj03049
on March 14, 2011
-
I have had the Advance for 3 years and burn 4 tons per year. It runs 24/7 from October to April. Absolutely no problems, 100% reliable. Maintains constant temperature and heats my 2500 sq foot...
- Harman Advance
- Reviewed and rated by
bruffinit
on March 08, 2011
-
I have had the Advance for 1 yr. After a couple of months, I was hearing a loud noise while the unit was running. Turns out it is the auger motor. The dealer came out and told me to put a...
- Harman Advance
- Reviewed and rated by
John K
on January 06, 2011
-
Referencing the feed motor chain. Things to consider:
1. The tension block must be adjusted so there is a SLIGHT slack in the tension, too tight and you will wear...
- Harman Advance
- Reviewed and rated by
Len
on February 13, 2010
-
Bought a 6-year old Harman Advance Stove.
Using in my shop that is 1,500sf.
Burning Lowes Curan pellets.
Temps in North Jersey have been from low teens at night to mid 30’s at...
- Harman Advance
- Reviewed and rated by
Delinda
on February 06, 2010
-
We have the Harman Advanced model. we are experiencing the flame seems sluggish, is burning very rich and seems to burn with more smoke like the air is being choked. The glass turns black from...
- Harman Advance
- Reviewed and rated by
BBri
on January 30, 2010
-
I have the advance model. wanted the p 68 but th edealer talked me out of it (too much heat for our 3000 sq ft rancher) he was right. our advance is great. much kudos to rettinger in NJ. Burns...
- Harman Advance
- Reviewed and rated by
anjenaire
on November 30, 2009
-
Lots of problems with this stove. Every year something new. Out of warranty now so all on me. Problem with chain falling off, broke the gears of feed mechanism, sensor went bad, feed motor bad,...
- Harman Advance
- Reviewed and rated by
Heidi
on November 19, 2009
-
I have had more problems with my Harmon Advance automatic ignition. Once again it is not working and I have already replaced it 2 times in 5 years. It is very frustrating when I was told last...
- Harman Advance
- Reviewed and rated by
cipher00012
on April 27, 2009
-
I live in Queens, New York. Formally, pellet stoves are not approved for use in five borough. But being fed up with monopoly of local gas company I decided to buy a pellet stove anyway. I was...
- Harman P-65
- Reviewed and rated by
North West Wyoming
on January 03, 2009
-
Easy to use, dealer support very poor, I have had $300 in replaced parts in two years, and no warranty coverege. Two Ignitors, two chimminey sensors, and one thermostat. Dealer in Billings would...
- Harman Advance
- Reviewed and rated by
codebum
on December 29, 2008
-
I use the stove as supplemental heat. It controls itself and maintains a constant tempature. The advance is stylish and easy to maintain. Only one small drawback is that I have to open both side...
- Harman Advance
- Reviewed and rated by
Supermom
on November 23, 2008
-
My stove heats up my 2300 sq. ft, 2 story home easily. I have an open floor plan and the heat just travels throughout my home. I just purchased another stove for my garage and I wish I had done...
